<thead id="l9blv"></thead>
<sub id="l9blv"></sub><address id="l9blv"></address>

<address id="l9blv"></address>
      <thead id="l9blv"></thead>
      <sub id="l9blv"></sub>

        <address id="l9blv"></address>

        EN | CN
        Stand alone equipment
        单机设备
        Device description
        In falling film evaporation, the material is fed from the passage in the heating chamber and distributed evenly into the heat exchange tube after distribution and film forming device.  Under the action of gravity, vacuum induction and airflow, the material forms a uniform film and flows down from the top.  During the flow, the material is heated and vaporized by the heating medium in the housing.  The released steam and liquid phase will enter the evaporator's separation chamber to completely separate the steam and liquid.  The steam enters the condenser for condensation (single operation) or enters the next stage of the evaporator as a heating medium, thus achieving multistage operation and separating the liquid phase discharged from the chamber.  
        working principle
        To evaporation materials through feed pump from the top falling film evaporator, evaporation tube (monitor), the material through the cloth membrane in membrane distribution in the heat exchange tube, when material with gravity flow lumen is outside of the tube steam heating, evaporation after reaching evaporating temperature, material together with the secondary steam from the tube in the form of thin film evaporation.  The secondary steam is compressed by the steam compressor and sent to the shell side of the falling film heating chamber as heating steam.  The shell side of the falling film heating chamber has plates to guide the secondary steam, condense and discharge the gas that cannot be condensed.  In the process, the heat energy itself passes through the wall of the tube from outside to the material in the tube evaporation, and the secondary steam is condensed into water and discharged out of the falling film evaporator after heat exchange.  
        technical specification

        Falling film evaporator  

        E Device model JPFE-001  

        Main material Food grade stainless steel SUS304 (or customized)  

        Processing capacity 3000L to evaporation (or custom)  

        Dimensions 8000 * 5000 * 8300 to 13000 * 9000 * 9000 (unit: mm)  

        The equipment applies vacuum evaporation of liquid materials at low temperature  

        Application scope concentrated apple juice, pear juice, peach juice, grape juice and so on

        Features
        The equipment can realize automatic production, intelligent system management, and in line with GMP standards
        Large evaporation ratio makes viscous liquid materials easy to flow and evaporate. Not easy to scale, short concentration time, concentration ratio up to 1:5
        The evaporation temperature is low, part of the secondary steam can be re-inhaled into the first stage heater through the jet heat pump, the heat is fully utilized, the evaporation temperature is relatively low
        Low steam consumption, 1kg steam can evaporate 3.2kg water
        It consists of single/double/triple effect separator, single/double/triple effect evaporator, preheater, condenser and hot pressure pump
        Finished product display
        Contact Us
        If you need, please contact us immediately
        Website:http://www.onirodinamica.com  |   Email:info@sinojump.com  |   Chief engineer:13916945636 ? (Zhao Gong)  |   Sales manager:13310056506 (Miss Jing)
        Website:http://www.onirodinamica.com
        Email:info@sinojump.com
        Chief engineer:13916945636 ? (Zhao Gong)
        Sales manager:13310056506 (Miss Jing)
        栏目 整线 单机 电话
        网络彩票网址