<thead id="l9blv"></thead>
<sub id="l9blv"></sub><address id="l9blv"></address>

<address id="l9blv"></address>
      <thead id="l9blv"></thead>
      <sub id="l9blv"></sub>

        <address id="l9blv"></address>

        EN | CN
        Stand alone equipment
        单机设备
        Device description
        Spray dryer is the most widely used process in liquid process forming and drying industry.  Most suitable for generating powdery and granular solid products from solution, emulsion, suspension and paste liquid raw materials.  Therefore, when the particle size distribution, residual water content, bulk density and particle shape of the finished product must meet accurate standards, spray drying is a very ideal process.  Divided into centrifugal type and pressure type, according to the characteristics of different materials to choose different atomization.  Widely used in chemical, food and pharmaceutical industries.  Centrifugal spray: suitable for materials with high viscosity or solid particles, atomizing operation flexibility is wide.  The designed production capacity can be adjusted within ±25%.  Pressure spray tower: suitable for low viscosity and pure liquid materials, the use of high pressure pump (8-20mpa), from the special nozzle.  
        working principle
        After filtration and heating, the air enters the air distributor at the top of the dryer, and the hot air enters the drying chamber evenly in a spiral shape.  Through the high speed centrifugal atomizer at the top of the tower, the material liquid is sprayed into a very fine mist, which can be dried into the finished product in a very short time after parallel contact with hot air.  The finished products are continuously output from the bottom of the drying tower and the cyclone separator, and the exhaust gas is emptied by the fan.  
        technical parameters

        Product name Spray dryer  

        Device model JPSD-100  

        Main material food grade SUS304 high quality stainless steel (or according to customer requirements)  

        Processing capacity 0.5 tons/hour to 5 tons/hour (or customized according to customer requirements)  

        Tower size φ2250*2200 to φ9500 * 11300 (mm)  

        The equipment is suitable for making dry powdery, fine and medium granule products  

        Applicable to all kinds of fruit and vegetable powder, rich milk powder, cocoa milk powder, milk replacer powder, hunting blood powder, egg white yellow, etc.  Oats, chicken juice, coffee, instant tea, flavoring meat, protein, soybean, peanut protein, hydrolysate, corn pulp, corn starch, glucose, pectin, maltose, potassium sorbate, etc  

        Features
        he production process is simplified and the operation and control is convenient. The liquid with moisture content of 40-60% (up to 90% for special materials) can be dried into powder products at one time, without crushing and screening after drying, reducing production process and improving product purity. The particle size, bulk density and moisture of the product can be adjusted by changing the operating conditions within a certain range, which is very convenient for control and management
        The product has good uniformity, fluidity and solubility, high purity and good quality
        The drying speed is fast, the surface area of the material liquid is greatly increased after atomization, and 95%-98% of the water can be evaporated instantly in the hot air flow, the drying time is only a few seconds, especially suitable for the drying of heat-sensitive materials
        Finished product display
        Contact Us
        If you need, please contact us immediately
        Website:http://www.onirodinamica.com  |   Email:info@sinojump.com  |   Chief engineer:13916945636 ? (Zhao Gong)  |   Sales manager:13310056506 (Miss Jing)
        Website:http://www.onirodinamica.com
        Email:info@sinojump.com
        Chief engineer:13916945636 ? (Zhao Gong)
        Sales manager:13310056506 (Miss Jing)
        栏目 整线 单机 电话
        网络彩票网址