<thead id="l9blv"></thead>
<sub id="l9blv"></sub><address id="l9blv"></address>

<address id="l9blv"></address>
      <thead id="l9blv"></thead>
      <sub id="l9blv"></sub>

        <address id="l9blv"></address>

        EN | CN
        Stand alone equipment
        Device description
        Belt dryer is a batch, continuous production of drying equipment, the main heating methods are coal heating, electric heating, steam heating, hot air heating.  Its main principle is to put the materials uniform flat out on the chain plate, mesh belt use 3 to 8 mm, between aperture by the transmission device drag moving back and forth inside the drying machine, hot air in the materials passing through, the water vapor from the eduction in the platoon is wet hole, so as to achieve the purpose of drying, the body length is made up by the standard section, in order to save space, the dryer can be made into multi-layer.  Net belt dryer can be used for electric drying, coal drying, steam drying and other drying methods, suitable for sheet, cylinder, block and other forms of material drying, heat transfer area is large, good air permeability, long service life, drying volume.  
        working principle
        The material is evenly spread on the conveyor belt by the feeder and moved in the dryer by the drive device.  The dryer is composed of a number of units, each unit independent circulation of hot air, part of the tail gas discharged by a special exhaust fan, each unit exhaust gas are controlled by a regulating valve.  The hot air passes through the chain plate covered with materials from top to bottom or from bottom to top to complete the process of heat and mass transfer and take away the moisture of materials.  The net belt moves slowly, the running speed can be adjusted freely according to the temperature of the material, and the finished product after drying falls into the receiver continuously.  The upper and lower circulation units can be flexibly equipped according to user needs, and the number of units can be selected according to needs.  
        technical specification

        Product name Net belt dryer  

        Device model JPRT-100  

        Main material food grade SUS304 high quality stainless steel (or according to customer requirements)  

        Processing capacity 0.3t/h to 3t/h (or customized according to customer requirements)  

        Dimensions 10500*1200*700 to 22500*2000*1800 (mm)  

        The equipment is suitable for hot air drying and dehydration of fruits and vegetables such as flake, cylinder and block  

        Applicable scope fruits, vegetables, medicinal materials, etc  

        The net belt is driven by the speed regulating motor, which can adjust the operation speed and control the drying time according to the need. Digital display of temperature in each section of the dryer facilitates the control and control of temperature in the kiln
        The screen mesh is made of heat-resistant steel wire, with high strength, easy deformation and good air permeability
        With automatic tensioning device, the net belt runs smoothly and turns freely, so as to solve the phenomenon of chain drop, chain jam, deviation and so on
        Finished product display
        Contact Us
        If you need, please contact us immediately
        Website:http://www.onirodinamica.com  |   Email:info@sinojump.com  |   Chief engineer:13916945636 ? (Zhao Gong)  |   Sales manager:13310056506 (Miss Jing)
        Chief engineer:13916945636 ? (Zhao Gong)
        Sales manager:13310056506 (Miss Jing)
        栏目 整线 单机 电话